PERANCANGAN MESIN PENGIRIS TEMPE SEMIOTOMATIS DENGAN ARAH PENGIRISAN HORIZONTAL

Agung Purwo Utomo, Qomaratun Nurlaila

Abstract


The tempeh slicing machine is a tool to assist the production of tempeh chips used by chips SMEs. For now, there are still many MSME chips that slice tempeh manually using a knife or similar cutting tool. It is necessary to design a semi-automatic tempeh slicing machine so that it can replace manual work. The expected results are to make the tempeh slicing time faster, the tempeh slicing process safer, and to get tempeh slices that are consistent in thickness and according to the target. The specifications of the tempeh slicing machine design are as follows: length 545 mm, width 500 mm, height 700 mm can be adjusted (adjustable), motor power 0.25 HP with rotation speed of 1,410 rpm, shaft diameter 30 mm, pulley driver diameter 50.8 mm, the diameter of the driven pulley is 254 mm, the rotation speed of the slicing disk is 282 rpm. The performance of the machine is not in accordance with the design, where when used for slicing tempeh, the results are 98% of the slices are not feasible and only 2% of the slices are feasible. But when used for slicing cassava, potatoes and carrots, the resulting slices were 98% proper slices and 2% improper slices. The machine designed for slicing tempeh did not work for slicing tempeh but it did for slicing cassava, potatoes and carrots.


Keywords


Tempeh Slicing machine

Full Text:

PDF

References


B. B. P. Simbolon, J. F. Sihombing, P. B. Panjaitan, and R. M. S,. 2013. Rancang Bangun Mesin Pengiris Tempe Kapasitas 30kg/jam, [Skripsi]. Medan : Politeknik Negeri Medan, Pendidikan Diploma III

Bureau of Energy Efficiency, Ministry of Power, India. Energy Efficiency in Electrical Utilities. Book 3. 2004

KKHH Djoekardi, D., 2006. Mesin-Mesin Motor Induksi. Universitas Trisakti, Jakarta.

Ferlina, F. 2009. Tempe. http://adln.lib.unair.ac.id/go.php. Diakses tanggal 8 November 2021.

Ginting. E, Sri Satya Antarlina. S.S., dan Sri Widowati. S, 2009. Varietas Unggul Kedelai Untuk Bahan Baku Industri Pangan. Jurnal Litbang Pertanian. 28:79-87

G. Niemen. 1999. Elemen Mesin Jilid 1. Jakarta: Erlangga

Handoko. M. B. 2018. Rancang Bangun Alat Pengiris Tempe Mekanis Tenaga Penggerak 0,5 HP, [Skripsi]. Medan: Universitas Sumatera Utara, Fakultas Pertanian.

Hiola, Eska, dkk. 2016. Rancang Bangun Alat Pemotong Lontong Kerupuk Menggunakan Tali Senar. Gorontalo: JTPG

Mariana Rina. 2009. Pengaruh Diferensiasi Produk Kripik Tempe Terhadap Loyalitas Konsumen. Jurnal Media Pendidikan, Gizi dan Kuliner Vol 1 No.1. Universitas Negeri Malang. Malang

Radiyati. 1990. Kerupuk Keripik. Subang : BPTTG Puslitbang FisikaTerapan-LIPI. Hal. 21-26.

Sarwono, B. 2010. Usaha Membuat Tempe dan Oncom. Jakarta: Penebar Swadaya.

Sularso dan Suga Kiyokatsu, 1997. Dasar perencanaan dan pemilihan elemen mesin. Jakarta : PT Pradnya Paramita.

Sularso, Kiyokatsu Suga. 2004. Elemen Mesin. Jakarta: Pradnya Paramita

Soenarta, N. dan S. Furuhama. 2002. Motor Serbaguna. Pradnya Paramita, Jakarta.

Oberg, Erik. Jones, Franklin D. Horton, Holbrook L. Ryffel and Henry H. 2004. 27th Edition Machinery’s Handbook. Industrial Press Inc, New




DOI: https://doi.org/10.33373/profis.v9i2.3690

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 Universitas Riau Kepulauan

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.