PERENCANAAN PREVENTIVE MAINTENANCE LINE PRODUKSI DENGAN METODE RCM (RELIABILITY CENTERED MAINTENANCE) DI PT RAYA
Abstract
Maintenance on the machine is an activity that is needed to keep the system or equipment always in good condition when it will be used. The purpose of maintenance is to keep every component on the machine well maintained and can minimize costs or losses incurred due to long downtime. The RCM (Reliability Centered Maintenance) method is a method used to determine the planning of maintenance time intervals that lead to the ability of a machine to operate according to its function. The results of the FMEA analysis carried out, there are 3 machine components in the production line, namely forming paper with an RPN value of 84.588, curling with an RPN value of 83.6, flanging with an RPN value of 80.496. The results of calculations through exponential distribution for maintenance time intervals on the 3 components are Forming Paper of 0.407 hours, Curling of 0.457 hours, Flanging of 0.435 hours. the results of the reliability of the three components are Forming Paper of 1.42, Curling of 5.21, Flanging of 4.98. Based on the risk analysis carried out on the possibility of risk, the results show that the level of risk on 3 components is at a medium or medium risk level. The maintenance method used is visual check and preventive maintenance planning.
Keywords
Full Text:
PDFReferences
Harys. 2020. “Analisis Risiko.” Jobglass.Com. Retrieved November 21, 2022 (https://www.jopglass.com/analisis-risiko/).
Hermawan, Indra, and Wikrama Jaya Sitepu. 2018. “Tinjauan Perawatan Mesin Mixing Pada Ud Roti Mawi.” Jurnal Teknovasi: Jurnal Teknik Dan Inovasi Mesin Otomotif, Komputer, Industri Dan Elektronika 2(1):117–28.
Hisprastin, Yasarah, and Ida Musfiroh. 2021. “Ishikawa Diagram Dan Failure Mode Effect Analysis (FMEA) Sebagai Metode Yang Sering Digunakan Dalam Manajemen Risiko Mutu Di Industri.” Majalah Farmasetika 6(1):1–9.
Hutabarat, Felisia Meini, and Augie David Manuputty. 2020. “Analisis Resiko Teknologi Informasi Aplikasi VCare PT Visionet Data Internasional Menggunakan ISO 31000.” Jurnal Bina Komputer 2(1):52–65.
Islam, Sri Susilawati, Tika Lestari, Anisa Fitriani, and Dilla A. Wardani. 2020. “Analisis Preventive Maintenance Pada Mesin Produksi Dengan Metode Fuzzy FMEA.” JTT (Jurnal Teknol. Terpadu) 8(1):13–20.
Kusuma, Antonius, and M. Nusron Ali Mukhtar. 2019. “Analisa Kinerja Mesin Wtp Menggunakan Metode Fmea Dan Penjadwalan Preventif Maintenance.” Waktu: Jurnal Teknik UNIPA 17(1):15–25.
Mukhtar, M. Nushron Ali. 2022. “Reability Analysis and Scedulling Preventive Maintenance for Spray Dryer Machine.” International Journal of Science, Engineering and Information Technology 7(1):358–63.
Nurcahyo, Joko, and M. Nushron Ali Mukhtar. 2021. “PENJADWALAN PERANCANGAN PREVENTIVE MAINTENANCE PADA KENDARAAN FORKLIFT KOMATSU MENGGUNKAN METODE RCM DI CV. SETIA MAKMUR.”
Prastiawan, Andi, Hari Rarindo, Eko Hendry, Syamsul Hadi, and Utsman Syah Amrullah. 2021. “Metode RCM Untuk Sistem Perawatan Mesin Amplas Multipleks Pada Pabrik Plywood.” Jurnal Teknologi 15(2):36–40.
Raharjo, Ivan Yosia, and I. Nyoman Sutapa. 2018. “Meminimalisasi Frekuensi Downtime Pada Mesin Ayakan Pellet 7 Di PT Charoen Pokphand Indonesia Feedmill Balaraja.” Jurnal Titra 6(2):107–14.
Santoso, Rizky Jafras, M. Nusron Ali Mukhtar, and Joko Sutrisno. 2017. “PENERAPAN KONSEP LEAN MANUFACTURING UNTUK MEMINIMALISASI WASTE PADA PRODUK ECO CHAIR DI BAGIAN CUTTING.” Seminar Nasional Teknik Mesin 12.
SETIAWAN, GIGIH HERI. 2021. “PENJADWALAN PERAWATAN MESIN FLEXO MENGGUNAKAN METODE RELIABILITY CENTERED MAINTENANCE DI PT SGM.”
Siregar, Ninny, and Sirmas Munthe. 2019. “Analisa Perawatan Mesin Digester Dengan Metode Reliabity Centered Maintenance Pada PTPN II Pagar Merbau.” JIME (Journal of Industrial and Manufacture Engineering) 3:2.
DOI: https://doi.org/10.33373/profis.v11i1.5081
Refbacks
- There are currently no refbacks.
Copyright (c) 2023 Universitas Riau Kepulauan
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
E-ISSN 2598-9987
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Profisiensi : Jurnal Program Studi Teknik Industri
Gedung A Lt.1, Fakultas Teknik, Universitas Riau Kepulauan
Jl. Pahlawan No.99, Batu Aji, Batam, Kepulauan Riau
Email: Profisiensi@journal.unrika.ac.id