Andi Aziz Mahligai, Nur Iksan, Pamor Gunoto, Ismail Yusuf Panessai


The safe box is one of the targets of theft crimes. With today's technological advances, the parts of our bodies can be used as unique identities so that they can be used as system access. This method is quite good because the security system can immediately recognize the physical characteristics of the owner when opening the safe. In this case the authors make a safe box security system with passwords and fingerprints verification based on IoT. This system uses a combination interlock where the fingerprint scanner cannot perform a fingerprint scan without entering a password. Then the alarm will sound, and the system will send a telegram message notification to the safe owner's cell phone if there is an error more than three times when entering the password or during fingerprint scanning, as well as when the safe door is open and when the safe lose of primary power supply to avoid the possibility of the safe moving when there is a theft. Keypad and fingerprint scanner to open the safe door. NodeMcu V3 as a medium for sending data from the microcontroller system to the safe owner's cell phone to provide information to the safe owner in the event of an attempt to break into the safe by someone else. LCD screen as a guide in the process of opening the safe door. From the manufacture of this tool, it is hoped that if someone who wants to break into a safe will be easily identified and maintain more security.

Full Text:



Didit, E, P. (2014). Sistem Keamanan Berlapis Untuk Lemari Brankas Dengan Menggunakan 3 Kombinasi Password. Skripsi. Program Sarjana. Sekolah Tinggi Manajemen Informatika dan Komputer AMIKOM Yogyakarta. Yogyakarta.

Fitri, H. (2019). Tren Masif Internet of Things (IoT) di Perpustakaan. Skripsi. Program Sarjana. Universitas Internasional Batam. Batam.

Prabhakar, S & Pankanti, S & Jain A.K. (2003). Biometric Recognition: Security and Privacy Concerns. IEEE Security and Privacy, 99(2), 33-42. SecurityandPrivacyConcerns. Diakses tanggal 25 September 2020.

I Nyoman, S & I Gede, S, W & Ade, S, W. (2016). Rancang Bangun Sistem Keamanan Brankas Menggunakan Kombinasi Password Dan Sidik Jari Berbasis Mikrokontroler Atmega328. Diakses tanggal 25 September 2020.

Ali, A, D & Mohamed, F. (2018). NodeMcu V3 for Fast IoT Application Development. Https:// Diakses tanggal 25 September 2020.



  • There are currently no refbacks.

E-ISSN 2599-0616


Sigma Teknika

Gedung Lt.1 Kampus Universitas Riau Kepulauan Batam

Jl. Batu Aji Baru No.99 Batu Aji