PENANGANAN PENGURANGAN JUMLAH DOWNTIME BERLEBIH DARI UNIT ABC 1 DENGAN PENDEKATAN LEAN MAINTENANCE PADA PT. XYZ
Abstrak
PT. XYZ is a manufacturing company that operates in the field of fertilizer and non-fertilizer production with the aim of helping the country realize a food self-sufficiency program. It is known that PT. XYZ has problems with excessive machine downtime in its production process. Problems occur because there is repeated damage to the machine, activities that involve waste, so that the maintenance system on one machine has not been carried out optimally. The aim of this research is to analyze maintenance activities implemented in the Company and then minimize waste in maintenance activities using a lean maintenance approach. Downtime data collection was carried out in April 2024, then data processing was carried out using equipment effectiveness to see how effective the existing equipment was, then continued with Maintenance Value Stream Mapping (MVSM) to find out waste that occurred during the maintenance process, after the cause of the waste. is known, several suggested options are given to minimize the waste that occurs. From the implementation of the recommendations made, the machine equipment effectiveness value increased from 92% to 97%, the maintenance effectiveness value increased from 41.6% to 66.7%.Referensi
T. I. Agro dan P. A. T. I. Makassar, “Identifikasi Perawatan Mesin Pemberi Pakan Dengan Metode Maintenance Value Stream Mapping ( Mvsm ) Pada Perusahaan Pakan Ternak,” hal. 121–126, 2023.
H. Prisilia dan D. A. Purnomo, “Pendekatan Konsep Lean Untuk Meminimalisir Waste Pada Pemeliharaan Pompa (Studi Kasus: PDAM Tirta Banyuwangi),” J. Tecnoscienza, vol. 8, no. 1, hal. 117–131, 2023.
P. Studi, T. Industri, dan U. Tarumanagara, “PENERAPAN LEAN MAINTENANCE PADA AKTIVITAS PERAWATAN MESIN UNTUK MINIMASI WASTE” vol. 1, no. 1, hal. 73–83, 2022.
Rochmoeljati, Muhammad Irza Firmansyah, dan Isna Nugraha, “Analisa Tingkat Waste Pada Bagian Perawatan Dengan Metode Lean Maintenance Untuk Meminimumkan Waste Di Pt. Varia Usaha Beton Gresik,” Waluyo Jatmiko Proceeding, vol. 15, no. 1, hal. 210–218, 2022, doi: 10.33005/waluyojatmiko.v15i1.46.
H. A. Iskandar, F. J. Daywin, dan J. Kristina, “PENERAPAN LEAN MAINTENANCE PADA PRODUKSI COLD PRESSED JUICE DALAM MENGURANGI DOWNTIME MESIN PADA PT . HOM KULINARI JAYA” vol. 1, no. 1, hal. 84–93, 2022.
J. ’ In dan R. E. Nugroho, “Analysis of the Application of Lean Maintenance to Optimize Transformer Maintenance Duration at MRO Company PT. Servo Indonesia Perkasa,” Ijevss, vol. 03, no. 03, hal. 2024, 2024.
S. Stevan Wijaya, D. N. Prayogo, dan M. A. Hadiyat, “Perancangan dan Penerapan Lean Maintenance Management di PT. Hapete,” Calyptra J. Ilm. Mhs. Univ. Surabaya, vol. 7, no. 2, hal. 4855–4872, 2019.
P. D. Karningsih, W. Puspitasari, dan M. L. Singgih, “Cost-Integrated Lean Maintenance to Reduce Maintenance Cost,” J. Optimasi Sist. Ind., vol. 22, no. 1, hal. 69–80, 2023, doi: 10.25077/josi.v22.n1.p69-80.2023.
W. Azhari, M. A. adi, A. C. Dewi, dan H. Mahfud, “Hoist Tulangan Machine Maintenance Design Using Lean Maintenance Method (Case Studi Of Pt. Xyz),” IOP Conf. Ser. Mater. Sci. Eng., vol. 1125, no. 1, hal. 012111, 2021, doi: 10.1088/1757-899x/1125/1/012111.
J. R. Díaz-Reza, J. L. García-Alcaraz, C. Sánchez-Ramírez, dan A. R. Vargas, “Assessing the impact of Lean manufacturing on the Social Sustainability through Structural Equation Modeling and System Dynamics,” Jordan J. Mech. Ind. Eng., vol. 18, no. 1, hal. 113–130, 2024, doi: 10.59038/jjmie/180109.
SIGMA TEKNIKA menggunakan perjanjian lisensi eksklusif. Penulis akan mempertahankan hak cipta bersama hak penggunaan ilmiah dan Universitas Riau Kepulauan akan diberikan hak penerbitan dan distribusi.
Akses penulis terbuka mempertahankan hak cipta dari makalah mereka, dan semua artikel terbuka didistribusikan di bawah syarat-syarat Lisensi Pengaitan Creative Commons (CC-BY), yang memungkinkan orang lain mendistribusikan dan menyalin artikel asalkan karya asli dikutip dengan benar.
Pengguna tidak dapat mewakili penulis sebagai dukungan adaptasi artikel mereka, dan tidak mengubah artikel sedemikian rupa untuk merusak kehormatan atau reputasi penulis.
SIGMA TEKNIKA uses an exclusive license agreement. The author will defend the copyright along with the scientific use rights and Riau Kepulauan University will be given the rights to issue and distribute.
Open author access retains the copyright of their paper, and all open articles are distributed under the terms of the Creative Commons Attribution License (CC-BY), which allows others to distribute and copy articles provided the original work is properly quoted.
Users cannot represent authors as support for the adaptation of their articles and do not change articles in such a way as to damage the honor or reputation of the author.
